Shop Front | Radio Control | Servos | Accessories, Test Gear & Spares

ServoSense Plus Current Logger - Part No: 3260-030
Shipping Weight 0.003 Kg

The ServoSense Plus is an inflight current logger for your radio gear. You can use it to help diagnose servo or BEC problems in your system. It can also help you determine what kind of switching BEC you need for your system, or if you need one at all.

ServoSense Plus is designed to be driven from a receiver battery or a BEC and measures the following:

Max current that occurs during flight (Up to 5A)
Max average current during any 15 second interval (Up to 5A)
Average current over whole flight (Up to 5A)

Max current will tell you if you're risking a BEC shutdown due to overcurrent.
Max over 15 seconds will tell you if your BEC is likely to overheat and shut down.
Average current will tell you how much of the capacity of the battery powering the receiver is being used.

The ServoSense Plus installs inline between your receiver and ESC. It displays the recorded information by blinking LEDs, then you can refer to the chart to go from number of blinks to number of amps.

The red LED blinks out the maximum current recorded during the flight in .1A increments. That is, 12 flashes means a max current of 1.2A.

The green LED blinks out the average current in .05A increments. 5 flashes would mean the average current drawn during the flight was .25A

The Max15 reading is displayed by both lights blinking simultaneously. It displays in .05A increments. For example, if they both flash 12 times, then 0.6A was drawn for 15 seconds, which means you should look into upgrading to a switching BEC if you run 3s or higher packs.

ServoSense Plus will work with receiver packs from 3.5V to 15V, as well as 5V or 6V BECs.

Quantity Price per Item (info)

1+ £11.47 (Including VAT at 17.5%)
£9.76 excl VAT

This site is closed to new orders but this and over 5,000 other products can be ordered from our superb new website at technobotsonline.com

People who bought this item also bought:

1. Timing Belt 840mm (Ref: 4606-018)

2. Timing Pulley 10T (Ref: 4605-010)

3. Timing Pulley 44T (Ref: 4605-008)

4. Timing Pulley 20T (Ref: 4605-003)

5. Silver Steel 12mm x 333mm (Ref: 4426-012)

Larger Image

CCPM Servo Consistency Tester - Part No: 3260-021
Shipping Weight 0.045 Kg

This servo tester allows the simultaneous testing of up to 3 servos. With three modes of operation, mode 1 - manual mode is where the servos respond direct to the rotary potentiometer knob position. Mode 2 sets the outputs to neutral (1.5mS). Mode 3 is an automatic sweep where the servos continually rotate back and forth between extremes. The selected mode is indicated by a bright blue LED, mode selection is by a push button.

Specifications
Number of Servo Slots : 3
Testing Modes : Manual, Neutral & Automatic "window wiper" mode
Input Voltage : 4.8 - 6v
Size: 48.5 x 42.5 x 15.6mm
Net Weight: ~30.5g

Quantity Price per Item (info)

1+ £12.16 (Including VAT at 17.5%)
£10.35 excl VAT

Sorry, currently unavailable, date for new stocks awaited

This site is closed to new orders but this and over 5,000 other products can be ordered from our superb new website at technobotsonline.com

People who bought this item also bought:

1. Synchroflex Timing Belt AT5x10mmx660mm (Ref: 4668-660)

2. Synchroflex Timing Pulley AT5x10mm 27T (Ref: 4624-127)

3. 1 Way Servo Tray (Ref: 3260-010)

4. Economy Standard Servo (Ref: 3221-010)

5. Solarbotics TPM2 Tiny Pager Motor Style 2 (Ref: 1451-018)

Larger Image

Video of Servo Consistency Tester in Operation

SD200 Gear Service Kit - Part No: 3260-001
Shipping Weight 0.005 Kg

A kit of replacement gears for our SD200 servo (3200-006).

Quantity Price per Item (info)

1+ £2.82 (Including VAT at 17.5%)
£2.40 excl VAT

This site is closed to new orders but this and over 5,000 other products can be ordered from our superb new website at technobotsonline.com

People who bought this item also bought:

1. Ni-Cad 4.8V Flat 700mA (Ref: 3700-001)

2. 200mm Servo Leads Tinned Bare Ends (Ref: 3601-008)

3. Futaba Servo SD200 (Ref: 3200-006)

4. Tx/Rx Ni-Cad Charger 70/70mA (Ref: 1071-001)

Larger Image

1 Way Servo Tray - Part No: 3260-010
Shipping Weight 0.015 Kg

A tray to assist in mounting a single servo (size S3003, S148 etc.)

Quantity Price per Item (info)

1+ £4.22 (Including VAT at 17.5%)
£3.59 excl VAT

This site is closed to new orders but this and over 5,000 other products can be ordered from our superb new website at technobotsonline.com

People who bought this item also bought:

1. Pot Servo Controller (Ref: 3403-010)

2. Universal Coupling Insert - Choice of Size (Ref: 4604-051)

3. Gold Plated PCB Header 2.54mm 36-way (Ref: 2700-085)

4. 300mm Servo Extension Lead (Ref: 3601-003)

5. Multicore - 3 core (Ref: 1131-001)

Larger Image

1 Way Universal Servo Tray - Part No: 3260-013
Shipping Weight 0.025 Kg

Servo trays are still a simple and popular way of mounting servos in a model - particularly a trainer where fuselage space is unlikely to be at a premium.

Quantity Price per Item (info)

1+ £2.00 (Including VAT at 17.5%)
£1.70 excl VAT

This site is closed to new orders but this and over 5,000 other products can be ordered from our superb new website at technobotsonline.com

Larger Image

3 Way Servo Tray - Part No: 3260-011
Shipping Weight 0.020 Kg

A tray to assist in mounting up to 3 servo's (size S3003, S148 etc.) Complete with mounting hardware.

Quantity Price per Item (info)

1+ £7.60 (Including VAT at 17.5%)
£6.47 excl VAT

This site is closed to new orders but this and over 5,000 other products can be ordered from our superb new website at technobotsonline.com

People who bought this item also bought:

1. 1/8 Inch Tubing Nut (Ref: 4028-020)

2. Stepped Olive 1/8 Inch (Ref: 4028-010)

3. Copper Tube 1/8 Inch x 10m (Ref: 4028-001)

Larger Image

Shop Front | Radio Control | Servos | Accessories, Test Gear & Spares

Just a few of the companies Technobots are an official distributor for: