£3.70

A robust momentary action foot operated switch with non slip base.

* Supplied with 1.7m lead terminated with a 3.5mm jack plug
* Dimensions 74 x 75 x 32mm
* Rated 3A 250V AC

find out more

£476.98

The superb new Futaba 10C radio supplied complete with the 21g R6014FS receiver and three digital servos.

It is also capable of opertaing exisiting compatible PPM and PCM 35MHz receivers by simply changing the module.

With a full 10 channels and FASST transmission it has a large backlit custom LCD display and highly effective jog-dial to make navigation between menus simple. Supplied as standard with 15 model memories, this can be increased with the addition of an optional CAMPac. With dedicated aircraft, helicopter and glider mixes and up to 8 freely-programmable mixes, the 10C offers high-end radio performance at a sports system price.
find out more

£64.82

Developed alongside the 6EXP transmitter on 2.4GHz, the R606FS 6 channel receiver utilises Futaba Advanced Spread Spectrum Technology (FASST) to give the ultimate in 2.4GHz
performance. Using Futaba's Diversity Antenna System gives superior reception, yet even with all this technology the receiver weighs a mere 9.8g!
find out more

£234.39

All the functions and features of Futaba's current 35MHz Field Force 7... but now on 2.4GHz and with even more extras! Other than the short 2.4GHz aerial, it feels just like its best-selling predecessor and the characteristic large LCD, 10 model memory and easy-to-use jog dial remain unchanged. However, it now benefits from the addition of an ailevator mix (two elevator/tailplane halves acting as both ailerons & elevators), a new swash > throttle mix and govenor control.

No corners cut - the new 2.4GHz FF7 is supplied complete with Futaba's new lightweight R617FS 2.4GHz receiver and four high torque S3152 digital servos!
Superior `channel-hopping' operating frequency changes every 2 milliseconds - unlike other less advanced systems that operate on one or two fixed frequencies.

High specification system complete with four S3152 digital servos, R617FS 2.4GHz receiver, rechargeable transmitter and receiver packs, mains charger, switch and accessories.
find out more

£13.15

LVBoost is a boost converter that can take voltages as low as 0.5V and convert them into higher, more useful voltages like 3.3V or 5V. It has an exceptionally low quiescent draw - typically under .4mA. these features make LVBoost a great choice for powering projects from solar or other renewable energy sources.

From a 3V input, 500mA @5V out is easily achievable, allowing you to charge nearly any portable device that meets the USB spec.

The output voltage is set with a small screw potentiometer on the side of the LVBoost.


Specifications:
2.2 to 5V output voltage range
0.5V to 5V input voltage range
1.5A max input current

Applications:
1 or 2 cell Alkaline/NiMH to USB chargers Solar cell regulation
Single cell lithium to 5V conversion
Thermoelectric Generators
Small wind generators and other dynamos
Phone chargers




find out more

£1.82

A range of key operated switches.

* SPST or SPDT
* Key removal in one or two positions
* Random key profiles (200 combinations of random key)
* Zinc alloy die cast housing and cylinder
* Bright chrome plated
* 4-pin tumbler mechanism
* Chrome plated zinc alloy tubular keys
* Silver plated contacts and terminals
* Hex nut mounted
* M12 panel cut-out
find out more

£1.82

This custom-designed plastic wheel by Pololu has a rubber tyre measuring (42 mm) in diameter and is designed to fit the output shafts on our . Teeth on the hub optionally allow a reflectance sensor to be used for encoder feedback. Note some of the geared motors have rather short shafts which means the wheel has to be attached the other way around for a firm fit.
find out more

£4.25

Very similar to the 4611-023 above but with a 3mm hole making it more suitable for those 3mm diamter shafts like the .
find out more

£49.98

A 3-channel 40MHz FM radio set that includes a receiver and crystal pair. It features a LCD display, digital trims and edit keys for setup as well as a 10 model memory. We understand these are manufactured by Sanwa, we are still checking on suitability of our existing crystal range.
find out more

£1.82

This compact bracket enables convenient mounting of popular, Sanyo-style miniature metal gearmotors. The plastic bracket encloses the otherwise exposed gears, and the mounting tabs capture the nuts for easy installation. This version has mounting tabs that allow for use with the .

The plastic mounting bracket allow you to easily and securely mount the standard 10 mm x 12 mm x 26 mm metal gearhead motors first popularized by Sanyo’s 12GN series (e.g. NA1S…NA3S), such as our mini metal gearmotors below.
find out more

£1.16

The provided mounting holes in the GM2/GM8 gear motors are a convenient way to mount these to your project but sometimes you just need a different way to mount them. These precision laser-cut steel brackets match the features on the gear motor, and securely clamp them down to your project.



Use any #4-sized screw or nut/bolt for assembly, but we use special #4x1/2" screw designed for threading plastic to mount these to our chassis. This screw also does a great job going into the steel bracket!

Note: We've discovered our latest batch of GM2 motors were molded a wee bit fatter around the tab that the motor-retainer screws into. This interferes with the little side-notches when you install it, so you have make the side-notches a wee bit deeper with a file. Or if you're feeling dangerous, you can use a small drill bit and "ride" it down into the notch a bit. Of course this is totally the wrong way to use a drill bit, but sometimes you got to use the tools you have!

find out more

£1.16

The provided mounting holes in the GM3/GM9 gear motors are a convenient way to mount these to your project, but sometimes you just need a different way to mount them. These precision laser-cut steel brackets match the features on the gear motor, and securely clamp them down to your project.
find out more